AUKOM training by ZEISS

International metrology basics as live online or classroom training

Coordinate measuring technology is an integral part of industrial quality assurance. Your application requires knowledge of the machines and measuring technology, as well as a basic understanding of math and physics. The AUKOM training concept conveys extensive knowledge of devices, evaluation of results, physical and mathematical calculations and basic knowledge of important standards.

AUKOM Training zertifiziert

AUKOM training content

AUKOM training gives you the opportunity to increase your knowledge and to improve your measuring skills. You learn standardized methods of entire measuring runs and receive in-depth training in all aspects of coordinate measuring technology. The multi-level, modular design of the courses enables you to obtain standardized knowledge and to enhance trust in your own measuring results.

More details on AUKOM and GD&T training

What is special about AUKOM trainings?
  • Global training standards enable internationally comparable and reproducible measurement results.
  • All AUKOM training courses are completely device and manufacturer neutral.
  • At the end of each seminar, participants receive a globally recognized AUKOM certificate.
  • AUKOM training is suitable for different knowledge levels – whether you are experienced or a beginner, there is a training for everyone.
What is special about AUKOM trainings?
  • Global training standards enable internationally comparable and reproducible measurement results.
  • All AUKOM training courses are completely device and manufacturer neutral.
  • At the end of each seminar, participants receive a globally recognized AUKOM certificate.
  • AUKOM training is suitable for different knowledge levels – whether you are experienced or a beginner, there is a training for everyone.

Register for AUKOM Remote Online Trainings

Virtual classroom-setting learning

We offer remote online training sessions in a classroom-style setting so that upon the completion of a group training course, you can optimally integrate the content you learned in your daily work and apply it to your own workpieces. This allows you to brush up on the basics, learn about additional functions and ask the trainer questions in real-time.

The minimum technical requirements for the live online training sessions are a stable internet connection, a computer and headphones (if preferred).

Available AUKOM Trainings for 2021 (Thai)


AUKOM GD&T

Jun intake (Classroom)

23 - 25 June 2021 | Wednesday - Friday, 9:30 AM - 5:00 PM (GMT +7)

Aug intake (Online, Remote)

9 - 11 August 2021 | Monday - Wednesday, 9:00 AM - 5:00 PM (GMT +7)

Sep intake (Classroom)

28 - 30 September 2021 | Tuesday - Thursday, 9:30 AM - 5:00 PM (GMT +7)

Dec intake (Classroom)

1 - 3 December 2021 | Wednesday - Friday, 9:30 AM - 5:00 PM (GMT +7)

Dec intake (Online, Remote)

22 - 24 Dec 2021 | Wednesday - Friday, 9:00 AM - 5:00 PM (GMT +7)

  • Choose between physical classroom training or remote online training
  • 3 days, no exams (for both classroom and remote online training)
  • Training conducted in Thai
  • Open to participants from Thailand only
  • Certificate of completion issued upon finishing the course

Day 1

  • Module 1: Basic rules of Geometrical Product Specifications (ISO GPS system) and ASME
  • Module 2: Functions, specifications, verifications, terms
  • Module 3: Tolerances of form

Day 2

  • Module 4: Size and angle
  • Module 5: Datum and datum systems
  • Module 6: Tolerances of orientation, location and run-out

Day 3

  • Module 7: Tolerances of profile
  • Module 8: Maximum material equipment
  • Module 9: Least material equipment, reciprocity requirements (ISO) and similarities with ASME
  • Module 10: Verification
  • Module 11: Tables and examples

Exam Date

There will be no exam for this training.

Training Fees

The fees per person are as follows, and are inclusive of certification fees:
 
  • Thailand (online): 14,120 THB
  • Thailand (classroom): 19,920 THB

 

 

Information

We recommend completing AUKOM's e-learning modules prior to attending this class. 

AUKOM Level 1

Mar intake (Classroom)

22 - 26 Mar 2021 | Monday - Friday, 9:30 AM - 5:00 PM (GMT +7)

May intake (Online, Remote)

11 - 14 May 2021 | Tuesday - Friday, 9:00 AM - 5:00 PM (GMT +7)

Sep intake (Classroom)

13 - 17 September 2021 | Monday - Friday, 9:30 AM - 5:00 PM (GMT +7)

Dec intake (Online, Remote)

14 - 17 Dec 2021 | Tuesday - Friday, 9:00 AM - 5:00 PM (GMT +7)

  • Choose between physical classroom training or remote online training
  • 4 days + 0.5 day for exam (classroom), or 3 days + 0.5 day for exam (online, remote)
  • Training conducted in Thai
  • Open to participants from Thailand only
  • Upon payment of certification fees and passing the exam, a trainee can earn his/her AUKOM certificate

Day 1

  • Quantities and units
  • 2-D and 3-D Coordinate systems
  • Coordinate measuring machines (CMMs)
  • Coordinate measuring machine sensors

Day 2

  • Fundamentals of coordinate metrology
  • Dimensional tolerancing
  • Geometric elements

Day 3

  • Geometric connections
  • Preparing a measurement
  • Sensor selection and qualification
  • Measuring

Exam Date

The AUKOM certification exam can now be taken remotely. More information will be provided by your trainer.

Thailand: Last day of training(s)

Training Fees

Save more when you send 2 participants and pay for the price of 1!

"Pay 1, Send 2" Promotion for AUKOM 1 Training
Until 30 September 2021

  • Pay for the training price for 1 participant, and send 2 participants from the same company
  • "Pay 1, Send 2" applies to training costs only
  • Fees for certifications are to be paid on an individual basis
  • Customers with valid SMA contracts receive 20% off on certification fees
  • For training after 30 September 2021, participants can still enjoy the "Pay 1, Send 2" promotion if payment has been made before 30 September 2021

The fees for 2 people are as follows, and are inclusive of certification fees:

  • Thailand (online): 21,140 THB for 2 pax
    (U.P. 15,620 THB per pax - save 10,100 THB!)
  • Thailand (classroom): 32,640 THB for 2 pax
    (U.P. 27,120 THB per pax - save 21,600 THB!)

 

 

 

 

 

 

Information

We recommend completing AUKOM's e-learning modules prior to attending this class. 

AUKOM Level 2

Jun intake (Classroom)

14 - 18 June 2021 | Monday - Friday, 9:30 AM - 5:00 PM (GMT +7)

Aug intake (Online, Remote)

2 - 6 August 2021 | Monday - Friday, 9:00 AM - 5:00 PM (GMT +7)

Oct intake (Classroom)

18 - 22 October 2021 | Monday - Friday, 9:30 AM - 5:00 PM (GMT +7)

  • *NOTE: Participants must be AUKOM 1 certified to register for AUKOM 2
  • Choose between physical classroom training or remote online training
  • 4 days + 0.5 day for exam (for both classroom and remote online training)
  • Training conducted in Thai
  • Open to participants from Thailand only
  • Upon payment of certification fees and passing the exam, a trainee can earn his/her AUKOM certificate

Day 1

  • Measuring cycle overview
  • Geometry overview
  • Form, orientation and location tolerances

Day 2

  • Measuring strategy
  • Tactile sensors
  • Image processing

Day 3

  • Distance sensors
  • Computed tomography
  • CNC programming
  • Measuring freeform surfaces

Day 4

  • Evaluations
  • Influences in measuring uncertainty
  • Documentation
  • Best metrology practices

Day 5

  • Review & long break
  • Exam

Exam Date

The AUKOM certification exam can now be taken remotely. More information will be provided by your trainer.

Thailand: Last day of training(s)

Training Fees

The fees per person are as follows, and are inclusive of certification fees:

  • Thailand (online): 18,520 THB
  • Thailand (classroom): 27,120 THB

 

 

 

 

 

 

Information

We recommend completing AUKOM's e-learning modules prior to attending this class. 

AUKOM Level 1

A doctor hat icon with a star symbol placed below.

The AUKOM level 1 course provides basic knowledge in production measurement technology for beginners and advanced metrologists. The training focuses on dimensional tolerancing, programming basics, measurement sequence planning and an introduction to sensor and machine technology. With level 1 of AUKOM training, metrologists can reduce measurement uncertainties and ensure that their measurement results are reliable and comparable.

AUKOM Level 2

A doctor hat icon with two star symbols placed below.

In the seminar for AUKOM level 2, participants learn basic production measurement technology knowledge for advanced metrologists. The course focuses on form and position tolerancing, inspection plan interpretation, programming and monitoring as well as the use of suitable sensor and machine technology. The deeper understanding enables the metrologist to further reduce measurement uncertainties and make even more reliable measurements.

AUKOM GD&T

Most popular

A worksheet for the AUKOM GD&T seminar, on which a component lies.

The AUKOM GD&T seminar is aimed at advanced metrology engineers and design engineers. The focus is on in-depth knowledge of form and position tolerances according to ISO-GPS and ASME as well as the innovations of the respective standards. Like all AUKOM training courses, this seminar also complies with the worldwide qualification standard. Employees from design, development and production engineering will gain an insight into the subject of form and position tolerances from the point of view of the metrologist who has to implement the drawing specifications metrologically. In this way, misunderstandings and the potential loss of time can be prevented.

The contents of the AUKOM GD&T seminar include:
  • Basics of the ISO-GPS and ASME systems
  • Function, specification, verification terms
  • Linear dimensions and tolerances
  • Angular dimensions and tolerances
  • Datum reference systems
  • Directional, positional and run-out tolerances
  • Profile tolerances
  • Independency principle
  • Envelope requirement
  • Maximum material requirement
  • Least material requirement
  • Reciprocity requirement
  • Verification
  • Tables

AUKOM Level 3

A doctor hat icon with three star symbols placed below.

The target group of the AUKOM level 3 expert seminar are experienced metrologists. The seminar instructors impart production measurement technology knowledge with a focus on function and production-oriented measurement, filtering, program creation as well as computed tomography, quality and measuring room management. After this course of the AUKOM training, the experienced metrologist is able to communicate confidently across departments. The metrologist brings measurement uncertainties to a minimum while ensuring reliable and comparable results. In addition, the metrologist is also aware of the reduction of costs and rejects.

A metrologist is surrounded by ZEISS measuring machines and points his finger at a selection area.

Would you like to become an expert in coordinate measuring technology?

Then our AUKOM training courses are just right for you!

How to become an AUKOM metrologist

There are many ways to use a coordinate measuring machine for measuring tasks. None is wrong, but standardization can avoid errors and uncertainties. Therefore, the main goal of the AUKOM training is the worldwide comparability of measurement results. In the AUKOM training, the metrologists learn elementary metrological terminology. This puts them in a position to communicate clearly and technically correctly how a measurement result was produced – no matter which department in which company they are talking to. Through their expertise, AUKOM metrologists contribute to fewer measurement deviations and help reduce error costs. This strengthens the company's image and partnership with other companies, resulting in fewer complaints or recalls.

The training to become an AUKOM metrologist is modular and combines teaching contents from the AUKOM training courses Level 1, 2 as well as GD&T. After completion of all seminars and a successful examination, the participant receives the AUKOM metrologist certificate, which is valid for five years.  

AUKOM metrologist training procedure and course plan.
Two metrologists are discussing something.

AUKOM update training and AUKOM metrologist certificate

Change and further development also affect coordinate measuring technology. Our training content adapts to these changes too. This AUKOM seminar offers – without having to take an exam – an overview of the essential changes in the field of coordinate measuring technology in recent years. Get to know new technologies, standards and helpful tips. Keep your knowledge up to date and make sure your processes are always efficient.

Participants of the two- or three-day seminar learn new content regarding:

  • Latest standard definitions of size, shape and position according to ISO 1101, 14405, etc.
  • Product and manufacturing information (PMI)
  • Communication
  • Sensor technology
  • Creation of measurement strategies

The AUKOM seminar is primarily aimed at metrologists who have attended the AUKOM training courses on Level 2 and GD&T or Level 3 before 2020. After successful participation in the update course, you will also receive the AUKOM metrologist certificate.  

These companies rely on the international metrology basics training by ZEISS

"We Must Never Stand Still"

Trainings from ZEISS Ensure the Measuring Process at ZF

Customer Stories Jul 24, 2018

Tags: Automotive

Do you trust your measuring results?

Management at ZF Friedrichshafen puts their trust in ongoing AUKOM Management training programs.

Customer Stories Aug 8, 2018

Tags: Automotive

A Passion for Precision

ZEISS trains its people to ensure they’re well-equipped to meet the growing needs in quality assurance

Learn more about AUKOM training with #measuringhero

In our #measuringhero video we explain in a simple and understandable way what AUKOM means and what you can learn in the AUKOM training.  

Would you like to learn more about our international metrology basics training?

You can find the detailed course descriptions, dates and available slots in the ZEISS Metrology Portal (portal.zeiss.com). Are you interested in AUKOM training courses, but still need more information or have questions about the offer? Then write us an e-mail at zeissacademymetrology .global @groups .zeiss .com.

Apps that support the daily routine in metrology

Download our apps and learn more about metrological basics, form and position tolerances, gear metrology or computed tomography.  

A smartphone with opened ZEISS metrology app.

More learning topics by ZEISS

Software trainings in device and sensor configuration

Get to know the full potential of your ZEISS software - for safe handling of measurement data and software.

Apr 14, 2021

Technology-specific trainings for sensors, accessories and measuring devices

Theory & practice combined: become an expert for your measuring devices and sensors.

Apr 13, 2021

All learning formats at a glance

Learn from everywhere: live metrology online courses

Whether classroom training or live online training: refresh your knowledge from metrology classes and bring your trai...

Apr 1, 2021

Expand your knowledge with eLearnings

With eLearnings from the ZEISS Academy Metrology, you don't have to wait for the next training date but can start rig...

Mar 24, 2021

eBooks and apps: Metrology knowledge on-demand

As a technician or coordinate measuring technician, you encounter many questions during measurements in everyday life...

Mar 2, 2021

AUKOM training courses in coordinate metrology

Whether as training for beginners in coordinate metrology or further education for experienced coordinate metrology t...

Apr 15, 2021

Metrology training in your company

Get to know your measuring equipment better in an individual metrology course

Feb 28, 2021

Successful start in metrology with our basic seminars

In our one to two-day metrology courses, you can expand your knowledge in roughness measurement, geometric product sp...

Sep 30, 2020

ZEISS Metrology Portal

Your digital access point to all metrology services

Registration (Thai)

Information
If you would like to avail the AUKOM "Pay 1, Send 2" promotion, please register each participant using the same company name for easier reference.

Once we receive your submission, we will get in touch with you within 48 hours to confirm your registration.